SLR8g-without_shadow-web

SLR8G

Full Range, 2-Way Single Stereo Panel

The Stealth Acoustics model SLR8G is a dual channel two-way, full-range loudspeaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame that attaches directly to standard structural framing. The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area. Installation instructions are shown on a paper overlay that is to be removed before installation. The overlay can also be used as a cutting template for retrofitting the speakers into existing wallboard.

The SLR8G may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods such as Venetian plaster and select veneers are supported using special techniques.

The Stealth Acoustics SLR8G incorporates an acoustically coupled high quality, high-power 8” cone woofer and two direct coupled 25 mm neo-magnet high-frequency motors. Advanced internal carbon fiber materials allow for smooth frequency extension to 20 kHz. When the SLR8G is installed in standard insulated 2” x 4” framing and allowed to function in a full 8 foot stud bay, frequency response below 45 Hz can be achieved. The SLR8G contains independent crossover sections and protection circuits (high-frequency and low-frequency sections) for each channel that automatically reset upon reduction of excessive amplifier power.

Product Description

Frequency Response:

45Hz to 20kHz

Power Capacity:

120 watts RMS

60 watts minimum recommended power

Protection:

Four independent self-resetting devices (low and high frequency each channel)

Sensitivity:

82 dB (1 watt / 1 meter)

Driver Components:

High frequency:
Two 1” (25 mm) neodymium motor

Low-frequency:
1” (25 mm) voice coil, 8” (203 mm) woofer

Ceramic 20 oz. (622 gr) magnet

System Impedance:

8Ω nominal

Polar Dispersion:

170 degrees vertical and horizontal

Dimensions:

Width: 15-7/8” (403 mm)

Height: 22” (559 mm)

Mounting Depth: 2-1/2” (64 mm)

Product Weight:

14.5 lbs. (6.6 kg) each

Shipping Weight:

18 lbs. (8.1 kg) shipped as a single panel

Included Accessories:

Mounting shims

Mounting screws

Terminal wrench

Optional Accessories:

PS-22 PlaceSaver®

BX-22 MDF Acoustic Back Box

MBX-22 UL Listed Metal Back Box

MBA-22 UL Listed Metal Back Box – Adjustable

MBC-22 Concrete Back Box

SK-1 Shim Kit

CVXMR 100, 75 and 25 volt Constant Voltage Transformers

WARRANTY – Extended Warranty 15 year

Bize Yazınız

Burayı kullanarak mesaj gönderebilirsiniz. Mesajlarınız okunduktan sonra sizleri bilgilendireceğiz.

Okunabilir değil mi? Yazıyı değiştirin. captcha txt

Yazmaya başlayın ve arama için Enter tuşuna basın...

LR8g_without_shadowB22g_webpage-image