HAX-44/HDBT – HDMI 2.0 UHD 600 MHz 4×4 Matrix Switch

HAX-44/HDBT –  HDMI 2.0 UHD 600 MHz 4×4 Matrix Switch

HDMI 2.0 UHD 600 MHz 4×4 Matrix Switch w/HDCP 2.2, WebOS and Mirrored Long Distance HDBaseT POE 70M Ports.

Switching for High Value Content Made Simple!


Product Overview

HDMI 2.0 – 600 MHz HDMI matrix switch designed for switching in home and commercial environments where switching of high-value/high-bandwidth UHD (up to 2160P60 4:4:4) content is required. The HAX-44/HDBT features 4 HDMI 2.0 Inputs and 4 HDMI 2.0 outputs. All HDMI and HDBaseT Ports are HDCP 2.2 compliant enabling high value content playback and distribution.
The HAX-44/HDBT includes two 70 meter (228′) HDBaseT mirrored ports (ports 2 & 4) with IEEE 802.11af POE (48V) and includes two HDBaseT POE receivers.
Digital and analog audio de-embedding – with volume control is provided for each output.
For installation and control an Ethernet port and WebOS are included providing access for switching, EDID management, firmware updates, remote reset and 3rd party control and more.
Bi-directional IR – The HAX-44/HDBT is controllable via built in IR receiver. Additionally, full bi-directional IR with IR global routing is included.
Bi-directional RS-232 – A serial connection is provided for 3rd party control connection and device control.
HAX-44/HDBT routes Ethernet and is compliant with the entire Zigen ecosystem of products by routing network commands and control in receiver nodes.

Product Description

Typical Applications:

  •  High-end home theaters for switching UHD 2.0 content with HDCP 2.2 copy protection
  • Classrooms, Boardrooms, Conference rooms for switching UHD content sources via multiple control options (3rd party controllers, WebOS, simple remote or front panel buttons)
  • Long distance applications where the rack is up to 70 meters from the display.

Whats in the Box:

  • 1 x HAX-44/HDBT
  • IEC USA AC Cord 3’
  • Remote Control
  • 1 x User Manual



  • HDMI 2.0 (600 MHz UHD) on all HDMI ports.
  • 18 GBP/sec video bandwidth HDMI, 10.2 GBP/sec HDBaseT
  • WebOS Interface
  • Supports digital video formats up to 4K UHD (2160P60 @4:4:4 pixel format)
  • Advanced EDID management
  • Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio and more
  • Built in IR sensor plus 3.5mm jack and remote control
  • Bi-directional IR plus IR routing on all ports
  • Bi-directional RS-232 – Control switch or integrate 3rd party control.
  • SPDIF (coax) and PCM (L/R) ports for audio de-embedding of each output
  • HDCP 2.2 compliant – all ports
  • Built-in Power Supply


Video Bandwidth
HDMI – 18 GBP/sec
HDBaseT – 10.2 GPBS Max
Video Resolutions
All SMPTE & VESA in HDMI 2.0 Specification. Max SMPTE UHD – 4096x2160P60/RGB/4:4:4 8-bit.
Max for HDBaseT port is 2160P60/4:2:0 8-bit (HDBaseT/CAT limitation)
Color Space
Color Bit Depth
8-bit, 10-bit, 12-bit & 16-bit per pixel
Note: Resolution and video bandwidth limited – ex. 2160P60 RGB or 4:4:4 8-bit would use almost the entire 18 GBPS of bandwidth. 2160P60 4:2:2 10-bit (new Blu Ray) would exceed the previous 10.2 GBPS maximum of HDMI 1.4a and would not be able to travel over category cable using HDBaseT as of this writing.
Chroma Subsampling
4:4:4, 4:2:2, 4:2:0
See note above – chroma subsampling or color compression is related to bit depth and video resolution settings with regard to total bandwidth requirements. A 4K/60 signal at 4:4:4 chroma subsampling can have a maximum bit depth of 8 bits.
HDMI in & Out – Up to Dolby TrueHD and DTS-HD Master
SPDIF – Up to Dolby Digital & DTS 5.1
Audio Sampling Rates – Up to 1536 KHz
Distance – HDMI – Up to 5M @ 4K, HDBaseT – Up to 100M at 4K/60 4:2:0 8-bit
HDCP – 2.2, 1.4 or None
CEC – Pass through
4 x HDMI type A HDMI Input
4x HDMI type A HDMI Output
2 x RJ45 HDBaseT 70M Ports (2 & 4)
4 x SPDIF (coax) Digital Audio Outputs – 1 per output port
1 x RJ45 LAN Port for TCP/IP Control
1 x 9-pin RS-232 port
4 x 3.5mm global IR In ports
4 x 3.5mm global IR Out ports
1 x 5-pin Locking IR Connection (phoenix) in/out 3-12 VDC
1 x IR Sensor (In) – built in on front panel
1 x IEC 110-220VAC
Temperature – Operating 32-122 F (0-50 C), Humidity: 20-90% non-condensing.
1RU – Rack Mountable
HDBaseT Receivers – 3x3x1 inch
3 Pounds

Bize Yazınız

Burayı kullanarak mesaj gönderebilirsiniz. Mesajlarınız okunduktan sonra sizleri bilgilendireceğiz.

Okunabilir değil mi? Yazıyı değiştirin. captcha txt

Yazmaya başlayın ve arama için Enter tuşuna basın...